Evaporator Expansion and Extraction Vessels
Glass Expansion Standard Sample Tubing 1/16OD x 0.75mm ID x 10m long
Standard Sample Tubing 1/16OD x 0.75mm ID x 10m long. Ten meters (32.8 ft) of chemically resistant PFA sample tubing. Outside diameter of 1/16” and internal diameter of 0.75 mm.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Viton O-rings for base of HF Tracey spray chamber (PKT 10)
Viton O-rings for base of HF Tracey spray chamber (PKT 10). The O-Ring removal tool (50-100-1636) facilitates the removal and installation of O-rings. This tool is especially handy while wearing PPE that can limit dexterity.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Screws for Skimmer Interface TG1023-Ni or TG1023-Cu
Screws for Skimmer Interface 501907725 (3600813), or 501907724 (3601320). A packet of four screws compatible with Thermo X Series and X Series II skimmer cone interfaces. These should be replaced if they are corroded or worn.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Aluminum Skimmer Cone PerkinElmer NexION 1000/2000/300/350.
Aluminum Skimmer Cone – Aluminum skimmer cone for PerkinElmer NexION 1000/2000/300/350 ICP-MS. For lowest nickel background and laser ablation applications. Not recommended for samples containing HF. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection. Use skimmer ConeGuard to protect cone threads during cleaning, 70-803-1026.For standard samples and routine operation, we recommend Nickel Skimmer Cones, 501907685. For corrosive samples, including HF, we recommend Platinum Skimmer Cones, see catalog number 501907688.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion UniFit Connector with 1/16 OD X 0.50mm ID x 700mm long sample tube (PKT. 10)
UniFit Connector with 1/16 OD X 0.50mm ID x 700mm long sample tube. Package of 10 replacement sample lines. Compatible with Glass Expansion U-Series and DC Series Nebulizers. Used to carry sample from peristaltic pump tubing or mixing T to nebulizer. This consumable part should be replaced at a frequency of about every 6 months to ensure optimum sample flow.For UniFit Connector with 0.5mm ID, 1.3mm OD x 700mm long sample tube, NC1625341. For UniFit Connector with 0.18mm ID, 1.3mm OD x 700mm long sample tube, NC1973499.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion GazFit Connectors for 6mm OD side arm with connection for 1/8inch ID tubing (PKT.4)
GazFit Connectors. Package of 4 GazFit Connectors for 6mm OD side arm with connection for 3.2mm (1/8”) ID tubing.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion GazFit Connectors for 4mm OD side arm (PKT 4)
GazFit Connectors for 4mm OD torch side arms (PKT 4). Compatible with Glass Expansion’s D-Torch (30-808-3910) for Shimadzu ICPE 9000/9800 ICP-OES, and for Glass Expansion’s Semi Demountable Torch (30-808-4335) for Shimadzu ICPS 7500/8100 and ICPE 9000/9800 ICP-OES. Makes connection to torch side arms with soft walled tubing for argon gas supply.Also compatible with Glass Expansion Laser Ablation Adaptors 21-809-4140, 31-808-3045.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Safety Gloves, Medium
Safety Gloves, Medium. These safety gloves are provided with the D-Torch for use while handling the D-Torch. Always wear safety gloves and safety glasses when handling ICP torches because they contain glass. Other safety glove sizes available are small (P/N SAFEGLOVE-sml) and large (P/N SAFEGLOVE-lge). Safety glasses are also available (P/N SAFEGLASS). Safety first!Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion UniFit Connector with 0.25mm ID x 1.3mm OD x 700mm long tubing (PKT. 10)
UniFit Connector with 0.25mm ID x 1.3mm OD x 700mm long tubing sample tube. Package of 10 replacement sample lines. Compatible with Glass Expansion U-Series and DC Series Nebulizers. Used to carry sample from peristaltic pump tubing or mixing T to nebulizer. This consumable part should be replaced at a frequency of about every 6 months to ensure optimum sample flow.For the same UniFit Connectors with the same ID but a longer sample tube length of 1500mm, NFTS-075. For UniFit Connector with 0.5mm ID, 1.3mm OD x 700mm long sample tube, NC1625341. For UniFit Connector with 0.18mm ID, 1.3mm OD x 700mm long sample tube, NC1973499.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion UniFit-08-4 Assembly (PKT 4)
UniFit-08-4 Assembly (PKT 4). GazFit/UniFit drain fitting for 8mm OD HydraMist spray chamber drain and barbed end for soft walled tubing for peristaltic pump.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion EzyFit with 1.6mm (1/16”) OD X 0.25mm ID x 700mm long sample tube (PKT 10)
EzyFit with 1.6mm (1/16”) OD X 0.25mm ID x 700mm long sample tube. Package of 10 replacement sample lines compatible with Glass Expansion F-Series Nebulizers. Used to carry sample from peristaltic pump tubing to nebulizer or to carry internal standard to Glass Expansion’s Trident IS Kit for HF P/N NC2046964, 60-808-1150. This consumable part should be replaced at a frequency of about every 6 months to ensure optimum sample flow.For EzyFit Connector with 0.50mm ID, 1.6mm (1/16”) OD x 700mm long sample tube, EZT-16-50. For EzyFit Connector with 0.75mm ID, 1.3mm OD x 1500mm long sample tube, EZTS-075. For EzyFit Connector with 0.25mm ID, 1.3mm OD x 700mm long sample tube, EZT-025.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Platinum Skimmer Cone Perkin Elmer NexION 5000 (N8161041).
Platinum Skimmer Cone (N8161041) – Platinum skimmer cone for PerkinElmer NexION 5000 ICP-MS. Recommended for high TDS & corrosive samples, including HF (e.g., high matrix samples, samples with >5% acid matrix, HF). More durable, longer-lasting, & because it runs hotter it requires less frequent cleaning. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection. Use skimmer ConeGuard to protect cone threads during cleaning, 70-803-1026.For an economic alternative to a platinum skimmer cone for standard samples and routine operation, we recommend Nickel Skimmer Cones, PE4012-Ni; and Nickel Hyper Skimmer Cones, PE4015-Ni. For a Nickel Sampler Cone, use 501907684.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Platinum Skimmer Hot & Cold Plasma Thermo Q/RQ/TQ
Platinum Skimmer Cone, Cold and Hot Plasma (1341430) – Suitable for Thermo Q/RQ/TQ ICP-MS. Specifically designed to operate ONLY with the Cold Plasma Lens Kit (1341380). This skimmer cone can be used with the Cold Plasma Lens Kit to operate in both Cold (RF Power 550 W) and Hot Plasma conditions (RF Power 1550 W). Although the highest cost option compared to Ni, it is typically the most durable, longest-lasting, and because it runs hotter it requires less frequent cleaning. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. Use Skimmer ConeGuard (70-803-1028) to protect cone threads during cleaning. When not in use, keep cones stored in original packaging for protection.For high matrix tolerance and high sensitivity, we recommend TG1048-Pt. For Robust plasma conditions, we recommend TG1045-Ni.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Aluminum Sampler
Aluminum Sampler Cone – For Thermo/Finnigan Element 1, 2 & Neptune ICP-MS. Use for lowest Ni background, and laser ablation applications. Not recommended for samples containing hydrofluoric acid (HF). Use a new Graphite Sampler Cone Gasket (501907717) each time the cone is re-installed, even if it’s the same cone. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.For lowest boron background and semiconductor applications, we recommend a platinum cone, see catalog number 501907711.For high sensitivity applications and low matrix containing samples, we recommend Nickel Jet Sampler, see catalog number 501907709.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001